- The Filtration Society - http://www.filtsoc.org -

2013 programme

13 May – Technical Visit to Gebr. Röders AG, Germany

Gebr. Röders AG have produced needle felts and wool felts for more than 160 years and these find wide application in both gas and liquid filtrations. The visit will give you an insight into the production of needle felts and how these can be adapted to a given application.

11 June – Training Course: THE SOLID/LIQUID SEPARATION PROCESS

The course is a review of the processes involved in the separation of solids from liquids, and has the aim of brining attendees up-to-date with a wide range of solid/liquid separation technologies and understanding their operational aspects. It draws upon the presenters in depth knowledge of industrial applications and extensive R&D experience, and the emphasis will be on practical aspects with theoretical information presented only where needed to support understanding of the applications.

The course will be of interest to engineers, scientists, managers and other technical personnel involved in solid-liquid separation in the process and related industries. They will find the course informative, regardless of whether they design, purchase, research or use filtration and separation equipment. Plant engineers, technicians and operators will find the course materials directly applicable, and graduate students will value the expert introduction to the technologies.

Scope of the course:

The course will be held at the national Motorcycle Museum in the West Midlands.

Book and pay online now. [9]

12 June – Training Course: GETTING THE BEST PERFORMANCE FROM SOLID/LIQUID FILTERS

The course is a practical review of solid/liquid filtration with the aim of providing information and ideas to help you to get more out of your filtration processes. The presenters will use their extensive experience and in-depth knowledge of industrial applications to point to ways to improve the performance of filters and improve their profitability in an industrial process.

Attendance the previous day at The Solid/Liquid Separation Process is not a pre-requisite for attending this course. This course will be of interest to engineers, scientists, managers and other technical personnel involved in solid-liquid separation in the process and related industries, who will find the course informative, regardless of whether they design, purchase, research or use filtration and separation equipment. Plant engineers, technicians and operators will find the course materials directly applicable, and graduate students will value the expert introduction to the technologies.

Scope of the course:

The course will be held at the National Motorcycle Museum in the West Midlands.

Book and pay online now. [9]

13 June – Training Course: AIR POLLUTION CONTROL

This course is a comprehensive review of the processes involved in the separation of solid or liquid particles from gases, which will emphasise practical aspects and present appropriate theoretical information as necessary. . It will draw upon the presenters experience of industrial applications and R&D, and the emphasis will be on practical aspects with theoretical information presented only where needed to support understanding of the applications.

This Course will be of interest to engineers, technicians, scientists, managers, and other personnel involved in gas-solid separation in the process and other industries. They will find the course informative, regardless of whether they design, purchase, research, or use dust separation equipment for product recovery, emission control, air cleaning or process gas cleaning.

Scope of the course:

The course will be held at the national Motorcycle Museum in the West Midlands.

Book and pay online now. [9]

5 November – Training Course: MEDIA FOR GAS AND LIQUID FILTRATION

This course is of interest to engineers, scientists, managers and other technical personnel concerned with filter media and their applications in solid-liquid separation and solid-gas filtration processes. They will find the course informative, regardless of whether they design, purchase, research or use filter media or filtration and separation equipment. Plant engineers, technicians and operators will find the course materials directly applicable, and graduate students will value the expert introduction to the technologies.

The course is a review of the processes involved in the manufacture, properties and applications of filter media used in liquid and air (gas) filtration. It will draw upon the presenters in depth knowledge of industrial applications and extensive R&D experience, and the emphasis will be on practical aspects with theoretical information presented only where needed to support understanding of the applications. The topics that will be covered include:

• The Role of Media in Filtration
• Fibres and Yarns for Filter Media
• Woven Media – Production, Structure and Properties
• Non-woven Media – Production, Structure and Properties
• Membranes and Reactive Media
• Testing Filter Media for Gas Applications
• Characterising and Testing Filter Media for Liquid Applications

Book and pay online now. [13]

6 November – Conference and Exhibition: FILTER MEDIA 6

The filter medium is the critical component that determines whether a filter process will perform adequately to give the desired separation efficiency. One of the key roles of a filter medium is to create a clear separation of particulate from a fluid or gas with the minimum consumption of energy.

This one day conference and exhibition will bring together people interested in advances in new filter media that are being applied in industry. From tightening legislation to the growing number of finer, more demanding, filter processes, new filter media developments are constantly being driven by customer requirements. It has been 2 years since the last filter media one-day meeting organised by the Society. Since then new developments have taken place in media for both gas and liquid applications. This meeting will feature key elements of these developments, including the role of design of media, recent products grown from industrial R&D, and different modern filter media technologies in successful applications case studies. The continued development of filter media is key in many filtration processes and will be of particular interest to process engineers, designers, technical and R&D staff, research institutes and decision makers.

Book and pay online. [14]

6 November – Annual General Meeting